Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Explorer Base, 2.0 9 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control - Adaptive >> Diagnostic Routine(S) >> Diagnostic Routine N >> Pinpoint Test

Pinpoint Test

  1. INSPECT THE C-CM  BRACKET
    1. Inspect for damage to the C-CM  bracket.

    Is the C-CM bracket damaged? 

    1. Yes: REPAIR or REPLACE the C-CM  bracket as necessary. REFER to Cruise Control Module (C-CM) . CARRY OUT the C-CM  alignment. REFER to Cruise Control Module (C-CM) (with Sensor) Adjustment .
    2. No: GO to .
  2. CARRY OUT THE VERTICAL AND HORIZONTAL ALIGNMENT
    1. NOTE: Remove the front bumper cover to carry out the vertical alignment procedure.

      Carry out the C-CM  alignment. REFER to Cruise Control Module (C-CM) (with Sensor) Adjustment .

    Does the C-CM align correctly? 

    1. Yes: The system is operating correctly at this time. The concern was caused by a misaligned sensor.
    2. No: INSTALL a new C-CM  . REFER to Cruise Control Module (C-CM) .