Section 19 (Electronic Engine Controls - (Hybrid)): Specifications
WARNING: This page is about a different variant/trim than selected.
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| High Temperature Nickel Anti-Seize Lubricant XL-2 |
ESE-M12A4-A | - |
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A | - |
| Penetrating and Lock Lubricant (US); Penetrating Fluid (Canada) XL-1 (US); CXC-51-A (Canada) |
- | - |
TORQUE SPECIFICATIONS
| Description | Nm | lb-in | ||
|---|---|---|---|---|
| Camshaft Position (CMP) sensor bolt | 7 | 62 | ||
| Catalyst Monitor Sensor (CMS) (1) | - | - | ||
| Crankshaft Position (CKP) sensor bolts(1) | - | - | ||
| Cylinder Head Temperature (CHT) sensor | 12 | 106 | ||
| Engine plug bolt | 20 | 177 | ||
| Heated Oxygen Sensor (HO2S)(1) | - | - | ||
| Knock Sensor (KS) bolt | 20 | 177 | ||
| Manifold Absolute Pressure (MAP) sensor screw | 3 | 27 | ||
| Mass Air Flow (MAF) sensor screws | 10 | 89 | ||
| PCM bolts | 8 | 71 | ||
| Variable Camshaft Timing (VCT) oil control solenoid bolt | 10 | 89 | ||
|
||||