Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Escape XLS, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Electronic Engine Controls - (Hybrid)) >> Removal And Installation >> Powertrain Control Module (PCM) >> Installation

Powertrain Control Module (PCM): Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the PCM cowl seal.
  2. Install the PCM and the 2 bolts.
    • Tighten to 8 Nm (71 lb-in).
  3. Connect the 3 PCM electrical connectors.
  4. Attach the wiring harness retainer to the cowl stud bolt.
  5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. For additional information, refer to MODULE CONFIGURATION article.
scientia non olet · About Mike's Workshop Manuals