Removal and Installation
WARNING: This page is about a different car, the 2013 Lincoln MKX and 2013 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.
- Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
- Remove the Front Controls Interface Module (FCIM). Refer to Front Controls Interface Module (FCIM) .
- Remove the 4 screws and slide the ACM out.
- Disconnect the electrical connectors and the antenna cable connectors.
- To install, reverse the removal procedure.
NOTE:
Module configuration is required when a new ACM is being installed.
- Download the configuration information to the ACM. For additional information, refer to PMI in MODULE CONFIGURATION .