Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Information System And Entertainment System) >> Removal And Installation >> Steering Wheel Controls >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
  2. Using a suitable tool (flat-bladed trim removal trim), pry out the steering wheel controls.
    • Disconnect the electrical connector.
  3. To install, reverse the removal procedure.