Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Information System And Entertainment System) >> Removal And Installation >> Audio Input Jack >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.

Commercial vehicles 

  1. Disconnect the audio input jack electrical connector.

    Non-commercial vehicles 

  2. Remove the instrument cluster trim panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.

    All vehicles 

  3. Release the tabs and remove the audio input jack.
    Fig 1: Locating Audio Input Jack Tabs
    G06063153Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.