Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 59 (Information System And Entertainment System) >> General Procedures >> Ford Work Solutions™ Self-Diagnostic Mode >> Tool Link™ Diagnostic Test

Tool Link™ Diagnostic Test

WARNING: This page is about a different variant/trim than selected.
  1. Turn the in-dash computer on.
  2. Press the tool icon at the bottom RH corner of the screen (or press the tool hardkey).
  3. Scroll down and select the TOOL LINK icon.
  4. Select SERVICES, then STATUS.
  5. The following information (relevant to service) is displayed:
    Display Description
    RFID Antennas (ANT1, ANT2, ANT3) Displays whether each antenna is detected. On vehicles with only 2 antennas, it is normal for ANT3 to display "NOT Detected".
    Antenna, Tool Link ID, Raw EPC Displays (in this order) the antenna that detected a tag, the tag ID, and the tag serial number.
scientia non olet · About Mike's Workshop Manuals