Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Handles, Locks, Latches And Entry Systems) >> General Procedures >> Stepped Unlock Programming

Stepped Unlock Programming

WARNING: This page is about a different variant/trim than selected.
  1. With the ignition switch in the OFF position, press the LOCK and UNLOCK buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds.
    • The turn signals flash twice to indicate the mode change.
  2. Repeat Step  1 to enable/disable the stepped unlocking feature.
scientia non olet · About Mike's Workshop Manuals