Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 45 (Anti-Lock Brake System And Stability Control) >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation

Removal and Installation

WARNING: This page is about a different variant/trim than selected.
  1. Remove the brake disc. For additional information, refer to FRONT DISC BRAKE .
  2. Disconnect the front wheel speed sensor harness connector.
  3. Disconnect the front wheel speed sensor wire from the front brake hose.
  4. Remove the wheel speed sensor harness bolt.
    • To install, tighten to 9 Nm (80 lb-in).
  5. Remove the 2 bolts and the front wheel speed sensor assembly.
    • To install, tighten to 9 Nm (80 lb-in).
  6. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals