Section 26 (HVAC - Climate Control System - General Information And Diagnostics): Specifications: Specification

WARNING: This page is about a different variant/trim than selected.

MATERIAL SPECIFICATIONS

Item	Specification	Fill Capacity
Motorcraft® A/C Cooling Coil Coating YN-29	-	-
Motorcraft® A/C System Flushing Solvent YN-23	-	-
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	(vehicles without auxiliary systems) 237 ml (8 fl oz)
Motorcraft® PAG Refrigerant Compressor Oil YN-12-D	WSH-M1C231-B	(vehicles with auxiliary systems) 473 ml (16 fl oz)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	(vehicles without auxiliary systems) 0.85 kg (30 oz) (1.87 lb)
Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada)	WSH-M17B19-A	(vehicles with auxiliary systems) 1.53 kg (54 oz) (3.37 lb)

GENERAL SPECIFICATIONS

Item

Specification

A/C Compressor

Type

FS-18

Rotation

Clockwise

A/C Compressor Magnetic Clutch

Air gap between pulley and clutch plate

0.35-0.65 mm (0.014-0.026 in)

A/C Cycling Switch Open and Closed Pressures ⁽¹⁾

Open pressure

152-165 kPa (22-24 psi)

Closed pressure

317 kPa (46 psi) maximum

A/C Pressure Cutoff Switch ⁽¹⁾

Open status

2, 999-3, 275 kPa (435-475 psi)

Closed status

1, 586-1, 999 kPa (230-290 psi)

A/C Pressure Relief Valve ⁽¹⁾

Open pressures

3, 241-4, 137 kPa (470-600 psi)

Evaporator Core Orifice

Color

Black

Refrigerant System Dye

R-134a Leak Detection Dye 164-R6060 or 164-R6081

⁽¹⁾	Manifold gauge set pressures may vary slightly depending on the distance between the service gauge port valve and the A/C pressure relief valve, the A/C cycling switch or the dual function pressure switch location.