Max A/C

When MAX A/C is selected:

• the recirculation air duct door is at full vacuum, closing off outside air and admitting only recirculated air.
• the floor/panel door and the floor/defrost door are at the full vacuum position, directing airflow to the A/C register.
• the temperature is usually set for maximum cold but may be heated if desired.
• air will be picked up at the recirculation opening by the blower motor. With the A/C control set for maximum cold, airflow across the evaporator core will be diverted past the heater core and then directed into the passenger compartment through the instrument panel A/C register. There is also some airflow to the side window demisters.
• the A/C compressor will be enabled when MAX A/C is selected.
• the blower motor is ON.