Normal Operation: Notes

The PCM monitors the generator output via the GENMON circuit. If the PCM cannot read the GENMON circuit due to an open or short to ground, when the engine rises above approximately 2, 000 RPM, the generator defaults to a steady voltage of approximately 13.5 volts and the PCM sends a request to the Instrument Panel Cluster (IPC) to illuminate the charging system warning indicator lamp.

• DTC P0625 (Generator Field Terminal Circuit Low) - The PCM sets this DTC if the GENMON circuit is shorted to ground, the "A" sense circuit is open or the B+ circuit is open. This DTC also sets by a faulted PCM or generator.
• DTC P0626 (Generator Field Terminal Circuit High) - The PCM sets this DTC if the GENMON circuit is open or shorted to power. This DTC can also be set by a faulted PCM or generator.

This pinpoint test is intended to diagnose the following: 

• Fuse
• Wiring, terminals or connectors
• Engine, generator and battery grounds
• Battery
• Generator
• PCM