Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (Brake System - General Information) >> General Procedures >> Brake System Bleeding >> Hydraulic Control Unit (HCU)

Hydraulic Control Unit (HCU)

WARNING: This page is about a different variant/trim than selected.
NOTE: The HCU bleeding procedure must be carried out if the HCU or any components upstream of the HCU are installed new.
NOTE: Pressure bleeding the brake system is preferred to manual bleeding.
  1. Follow the Pressure Bleeding or Manual Bleeding procedure steps to bleed the system.
  2. Connect the scan tool and follow the ABS Service Bleed instructions.
  3. Repeat the Pressure Bleeding or Manual Bleeding procedure steps to bleed the system.
scientia non olet · About Mike's Workshop Manuals