Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2012 >> Econoline Base, Van Cargo >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Tire Pressure Monitor Systems) >> TPMS Reset Procedures >> Tire Pressure Sensor Activation

Tire Pressure Sensor Activation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, 2009 Ford Cutaway, and 2008 Ford RV Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to ON position.
  2. Place the activation tool on the left front tire wall 180 degrees from the valve stem.
  3. Press the test button on the Activation Tool to activate the TPM sensor. For best results, activate each sensor twice.
    NOTE: A green light will flash and a beep sound on the Activation Tool for each successful TPM sensor response.
  4. Preform steps 1-3 for each remaining tire.
    NOTE: After adjusting tire pressures and activating sensors, the tire pressure warning light is still illuminated. There is a malfunction in the TPM system. See appropriate manufacturer service information.
scientia non olet · About Mike's Workshop Manuals