Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Transit Connect Van Cargo >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Keyless Entry System >> General Procedures >> Stepped Unlock Programming

Stepped Unlock Programming

  1. With the ignition switch in the OFF position, press the LOCK and UNLOCK buttons on the Remote Keyless Entry (RKE) transmitter simultaneously for 4 seconds.
    • The turn signals flash twice to indicate the mode change.
  2. Repeat Step 1 to enable/disable the stepped unlocking feature.
scientia non olet · About Mike's Workshop Manuals