Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Ranger 2D Pickup, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal and Installation

Removal and Installation

  1. Remove the Hydraulic Control Unit (HCU). For additional information, refer to HYDRAULIC CONTROL UNIT (HCU) .
  2. Remove the 4 ABS module screws.
    • To install, tighten to 3 Nm (27 lb-in).
  3. Remove the ABS module from the HCU.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals