Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1343 (HVAC - Climate Control System) >> Removal And Installation >> Receiver Drier >> Material

Receiver Drier: Material

WARNING: This page is about a different car, the 2010 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATION CHART

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Receiver/Drive With Bolt And Fitting O-Ring Seal With Torque Specifications
G06384688Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION CHART

Item Part Number Description
1 - Receiver/drier bolt
2 19C836 Receiver/drier
3 - Receiver/drier fitting O-ring seal (4 required)