Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Focus SES, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Steering Wheel Rotation Sensor >> Removal and Installation

Removal and Installation

  1. Remove the steering column shroud. For additional information, refer to STEERING COLUMN article.
  2. Disconnect the steering wheel rotation sensor electrical connector.
  3. Remove the 2 bolts and the steering wheel rotation sensor.
  4. To install, reverse the removal procedure.
    • Carry out the IVD Initialization sequence. Follow the scan tool directions.
scientia non olet · About Mike's Workshop Manuals