Automatic Transaxle-Transmission External Controls - Select Shift: Overview
WARNING: This page is about a different variant/trim than selected.
The transaxle selector lever linkage consists of:
- a selector lever cable that connects the transaxle manual control lever to the selector lever assembly.
- a Brake Shift Interlock Actuator (BSIA) that is integral to the selector lever assembly.
- a SelectShift™ switch that allows the driver to have control over transmission shifting by manually selecting which gear to operate in.
The selector lever assembly:
- locks the transaxle selector lever in the PARK position when the ignition switch is in the LOCK position.
- requires the transaxle selector lever to be in the PARK position to turn the igntion switch to the LOCK position.