Idle Air Control (IAC) Valve

The IAC valve assembly controls the engine idle speed and provides a dashpot function. The IAC valve assembly meters intake air around the throttle plate through a bypass within the IAC valve assembly and throttle body. The PCM determines the desired idle speed or bypass air and signals the IAC valve assembly through a specified duty cycle. The IAC valve responds by positioning the IAC valve to control the amount of bypassed air. The PCM monitors engine RPM and increases or decreases the IAC duty cycle in order to achieve the desired RPM.

The PCM uses the IAC valve assembly to control:

• no touch start
• cold engine fast idle for rapid warm-up
• idle (corrects for engine load)
• stumble or stalling on deceleration (provides a dashpot function)
• over-temperature idle boost