Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seating - 1ST Row >> Removal And Installation >> Dual Climate Controlled Seat Module (DCSM) >> Installation

Dual Climate Controlled Seat Module (DCSM): Installation

  1. Install the Dual Climate Controlled Seat Module (DCSM) in the following sequence.
    • Connect the electrical connectors.
    • Secure the locking wedges on the 2 Dual Climate Controlled Seat Module (DCSM) electrical connectors.
    • Position the Dual Climate Controlled Seat Module (DCSM) and install the screws.
    2. NOTE: This step is necessary only if the Dual Climate Controlled Seat Module (DCSM) is being replaced.
  2. Programmable Module Installation (PMI) is required when installing a new Dual Climate Controlled Seat Module (DCSM). Refer to the scan tool instructions to carry out Programmable Module Installation (PMI).
scientia non olet · About Mike's Workshop Manuals