Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Explorer Base, AWD, 6F55 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Universal Transmitter - Universal Home Transmitter >> Diagnostic Routine(S) >> Diagnostic Routine A >> Pinpoint Test

Pinpoint Test

  1. CHECK FOR VOLTAGE TO THE UNIVERSAL TRANSMITTER
    1. Check the illumination of the universal transmitter by pressing one of the buttons.
      • Does the red indicator on the universal transmitter illuminate? 
      • Yes:  GO to on page 2.
      • No:  GO to on page 2.
  2. PROGRAM A HAND-HELD TRANSMITTER TO THE UNIVERSAL TRANSMITTER
      NOTE: The customer's hand-held transmitter is required when programming the universal transmitter.
    1. Program the universal transmitter. Refer to the Owner's Manual.
      • Does the universal transmitter program successfully? 
      • Yes:  The universal transmitter is OK. VERIFY the receiver unit operates correctly.
      • No:  INSTALL a new Left Hand (LH) sun visor. REFER to HEADLINER .
  3. CHECK THE OPERATION OF THE Left Hand (LH) VANITY MIRROR LAMP
    1. Verify the operation of the Left Hand (LH) vanity mirror lamp. REFER to DEMAND LAMPS .
      • Does the Left Hand (LH) vanity mirror lamp operate correctly? 
      • Yes:  INSTALL a new Left Hand (LH) sun visor. REFER to HEADLINER .
      • No:  REFER to Diagnostic Routine O to continue diagnosis.