Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2011 >> Escape Hybrid, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts And Descriptions (Hybrid) >> DTC Diagnosis >> DTC P0141: O2 Heater Circuit (Bank 1, Sensor 2)

DTC P0141: O2 Heater Circuit (Bank 1, Sensor 2)

P0141 - O2 HEATER CIRCUIT DTC DESCRIPTION CHART (BANK 1, SENSOR 2)

Description:  During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. The test fails when the current draw exceeds a calibrated limit or an open or short circuit is detected.
Possible Causes: 
  • Short to voltage in the harness or HO2S
  • Water in the harness connector
  • Open VPWR circuit
  • Open GND circuit
  • Low battery voltage
  • Corrosion or incorrect harness connections
  • Damaged HO2S heater
Diagnostic Aids:  Inspect the connectors for signs of damage, water ingress, or corrosion.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All GO to PINPOINT TEST DW .