DTC P0135: O2 Heater Circuit (Bank 1, Sensor 1)
P0135 - O2 HEATER CIRCUIT DTC DESCRIPTION CHART (BANK 1, SENSOR 1)
| Description: During testing the universal heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. The test fails when the current draw exceeds a calibrated limit or an open or short circuit is detected. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Inspect the connectors for signs of damage, water ingress, or corrosion. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DZ . | ||