Component testing procedure
WARNING: This page is about a different variant/trim than selected.
POWER SEAT SWITCH, LEFT - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Seat up/down circuit, rear | 4 and 7 | Up | Closed circuit |
| 5 and 2 | |||
| 4 and 5 | Down | Closed circuit | |
| 7 and 2 | |||
| Seat up/down circuit, front | 4 and 1 | Up | Closed circuit |
| 8 and 2 | |||
| 4 and 8 | Down | Closed circuit | |
| 1 and 2 | |||
| Seat forward rearward sensor | 4 and 3 | Forward | Closed circuit |
| 6 and 2 | |||
| 4 and 6 | Rearward | Closed circuit | |
| 3 and 2 |