Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Transit Connect Van Cargo >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal and Installation

Removal and Installation

  1. Remove the wheel and tire. For additional information, refer to WHEELS & TIRES .
  2. Remove the wheel speed sensor bolt.
    • To install, tighten to 9 N.m (80 lb-in).
  3. Disconnect the wheel speed sensor electrical connector.
    • Remove the sensor by detaching the pin-type retainer and pulling the sensor grommets out of the clips.
  4. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals