Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> RV Cutaway 6.0 P >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Pinpoint Tests -- E-Series 6.0L Diesel Models >> AP: Injection Control Pressure Too High - Engine OFF >> Introduction

AP: Injection Control Pressure Too High - Engine OFF: Introduction

This pinpoint test is intended to diagnose the following:

Fig 1: Injection Control Pressure (ICP) Sensor Connector
G06290824Courtesy of FORD MOTOR CO.
Fig 2: Powertrain Control Module (PCM) Connector
G06290825Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals