Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Charging System & Fuel Control System - 4.0L SOHC >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal and Installation

Removal and Installation

NOTE: The Fuel Pump Driver Module (FPDM) is located in the spare tire stowage compartment.
  1. Disconnect the FPDM  electrical connector.
  2. Remove the 2 bolts and the FPDM  .
    • To install, tighten to 10 Nm (89 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals