Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Valve Spring Strength >> Special Tool(s)

Special Tool(s)

SPECIAL TOOL DESCRIPTION CHART

G06289045Courtesy of FORD MOTOR CO.
 Pressure Gauge, Valve/Clutch Spring
303-006 (TOOL-6513-DD) or equivalent
NOTE: Refer to the ENGINE - 4.0L SOHC , ENGINE - 4.6L (3V) , and ENGINE - 5.4L (4V) for the specification.
  1. Use the Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
    Fig 1: Checking Valve Spring Correct Strength
    G06064108Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals