Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Focus S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Automatic Transaxle/Transmission >> Disassembly And Assembly Of Subassemblies >> Transfer Shaft >> Disassembly

Transfer Shaft: Disassembly

  1. Using the Bearing Puller, Front Wheel Hub Remover/Installer and the Step Plate, remove the RH transfer shaft gear bearing.
    Fig 1: Removing RH Transfer Shaft Gear Bearing
    G06292991Courtesy of FORD MOTOR CO.
  2. Using the Step Plate and a press, remove the LH transfer shaft gear bearing while separating the gears.
    Fig 2: Removing LH Transfer Shaft Gear Bearing
    G06292992Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals