Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Piston Diameter

Piston Diameter

NOTE: Refer to appropriate article in Engine for the specification.
  1. Measure the piston diameter 90 degrees from the piston pin and 42 mm (1.65 in) down from the top of the piston at the point indicated.
    Fig 1: Measuring Piston Diameter 90 Degrees From Piston Pin
    G06393417Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals