Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2010 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Stability/Traction Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the LH instrument panel trim panel in the following sequence:
    1. Pull out to release the retaining clips.
    2. Disconnect the satbility/traction contol switch electrical connector.
    3. If equipped, disconnect the adjustable pedal switch electrical connector.
  2. Depress the 2 tabs and remove stability/traction control switch from the LH instrument panel trim panel.
    Fig 1: Locating Stability/Traction Control Switch Tabs
    G06563952Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals