Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Taurus SEL, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Wheel Speed Sensor - Front >> Removal And Installation

Removal And Installation

  1. Remove the wheel and tire. For additional information, refer to WHEELS AND TIRES article.
  2. Disconnect the wheel speed sensor electrical connector.
  3. Remove the 2 scrivets and position aside the fender splash shield.
  4. Remove the wheel speed sensor harness pin-type retainer.
  5. Remove the 2 wheel speed sensor harness retainers.
  6. Remove the bolt and the wheel speed sensor.
    • To install, tighten to 8 Nm (71 lb-in).
  7. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals