Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Fusion S, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Manual Transmission External Controls System) >> Removal And Installation >> Gearshift Lever >> Removal

Gearshift Lever: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Disconnect the shift cable ends at the shift and select levers.
    3. CAUTION: Carefully disconnect the cable from the shift lever base. Do not damage the shift cable retainers.
  3. Disconnect the gearshift cables from the gearshift lever base.
    4. Fig 1: Locating Gearshift Cables
    GF0030108Courtesy of FORD MOTOR CO.
  4. Remove the 4 gearshift lever nuts.
  5. Remove the gearshift lever assembly.
scientia non olet · About Mike's Workshop Manuals