Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Focus S, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal And Installation

Removal And Installation

  1. Remove the hydraulic control unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) .
  2. Remove the 4 ABS module-to-HCU screws and the ABS module.
    • To install, tighten to 2 Nm (18 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals