Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Explorer 4.0 E, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate ENGINE - 4.0L SOHC or ENGINE - 4.6L (3V) .
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    2. Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G03885034Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    3. Fig 2: Measuring Telescoping Gauge Using Micrometer
    G03885035Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals