Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Information System & Entertainment System >> Removal And Installation >> Satellite Digital Audio Receiver System (SDARS) Module >> Removal and Installation

Removal and Installation

NOTE: This procedure applies to early build vehicles without navigation only. For all other vehicles, the satellite radio receiver is built-in to the Audio Control Module (ACM).
    NOTE: Module configuration is only required if a new Satellite Digital Audio Receiver System (SDARS) module is being installed.
  1. Upload the SDARS module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in MODULE CONFIGURATION .
  2. Disconnect the SDARS module antenna cable and electrical connectors.
    3. NOTE: Move the passenger seat all the way back to access.
  3. Remove the 2 nuts, the bolt, and the SDARS module.
  4. To install, reverse the removal procedure.
    • Download the configuration information to the SDARS module. For additional information, refer to PMI in MODULE CONFIGURATION .
scientia non olet · About Mike's Workshop Manuals