Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Escape Base, 2.5 7, AWD, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Stability/Traction Control Switch >> Removal and Installation

Removal and Installation

Fig 1: Identifying Stability/Traction Control Switch Assembly
G06094618Courtesy of FORD MOTOR CO.
PART DESCRIPTION CHART

Item Part Number Description
1 04608 Lower instrument cluster center finish panel
2 13350 Stability/Traction control switch assembly
  1. Remove the lower Instrument Cluster (IC) center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Depress the 2 tabs and remove the stability/traction control switch assembly.
    Fig 2: Locating Stability/Traction Control Switch Assembly Tabs
    G06094619Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals