Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge SEL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1778 (Information System & Entertainment System) >> Removal And Installation >> In-Dash Computer >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2009 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Remove the 4 screws and the in-dash computer.
    • Disconnect the electrical connectors.
  3. NOTE: Make sure the modem-antenna cable is routed to allow enough clearance for the in-dash computer. Failure to follow this instruction may result in damage to the modem-antenna cable.

To install, reverse the removal procedure.

scientia non olet · About Mike's Workshop Manuals