Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge SEL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1687 (Anti-Lock Brake System - Vehicle Dynamic Systems) >> Removal And Installation >> Stability/Traction Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  2. Depress the 4 tabs and remove the stability/traction control switch from the instrument panel center finish panel.
    3. Fig 1: Identifying Tabs
    GF0045803Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals