Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge SEL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1430 (Engine System - General Information) >> General Procedures >> Valve Spring Strength >> Special Tool(s)

Special Tool(s)

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL CHART

G06064107Courtesy of FORD MOTOR CO.
Pressure Gauge, Valve/Clutch Spring
303-006 (TOOL-6513-DD) or equivalent
NOTE: Refer to the appropriate ENGINE - 3.5L for the specification.
  1. Use the Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
    Fig 1: Checking Valve Spring Strength
    G06064108Courtesy of FORD MOTOR CO.