Tool Link
WARNING: This page is about a different car, the 2009 Ford Econoline. However, it is still accessible from the selected car via links, so may be relevant.
The Tool Link™ system consists of the following:
- In-dash computer
- Tool Link™ reader (located in the LH side of the cargo area behind the driver seat)
- Three Tool Link™ antennas (located throughout the cargo area)
- Tool ID tags (one tag located on each tool at the discretion of the customer)
The Tool Link™ antenna module uses the Tool Link™ antennas to broadcast a locator signal throughout the vehicle cargo area. The tool ID tags are read by the antennas to identify which tools are currently in the vehicle cargo area. This information is sent to the indash computer, where the user can inventory the available tools.