Brake Pads
WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not required to install new brake pads when the brake discs are machined.
- Inspect and measure the thickness of the brake pad friction material. For additional information, refer to SPECIFICATIONS .
- Minor surface cracks do not require pad replacement, however, if there are missing chunks or cracks in the lining through to the backing plate, install new brake pads. For additional information, refer to FRONT DISC BRAKE article for front brake pads or REAR DISC BRAKE article for rear brake pads.
- If the thickness of the friction material is less than the specified thickness, install new brake pads. For additional information, refer to FRONT DISC BRAKE article for front disc brakes or REAR DISC BRAKE article for rear disc brakes.
- If the friction material shows taper wear that is not within specifications, install new brake pads and verify the caliper guide pins are functioning correctly. For additional information, refer to BRAKE CALIPER GUIDE PINS .