Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1439 (Front Disc Brake System) >> Removal And Installation >> Brake Caliper >> Installation

Brake Caliper: Installation

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake hose and install the brake caliper flow bolt.
    • Install new copper washers.
    • Tighten to 47 Nm (35 lb-ft).
  2. Install the brake pads. For additional information, refer to BRAKE PADS .
  3. Bleed the brake caliper. For additional information, refer to BRAKE SYSTEM - GENERAL INFORMATION for Component Bleeding.
scientia non olet · About Mike's Workshop Manuals