Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1418 (Engine Controls - Diagnostic Methods- 6.0L Diesel) >> Flash Electrically Erasable Programmable Read Only Memory (EEPROM) >> Making Changes to the PCM Calibration

Making Changes to the PCM Calibration

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

At certain times, the entire flash EEPROM needs to be completely reprogrammed. This is due to changes made to the strategy or calibration after production or the need to reset the VID block because it has reached its limit. Refer to PCM/TCM/FICM Reprogramming on the scan tool.

scientia non olet · About Mike's Workshop Manuals