Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2009 >> Edge Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1737 (Engine System - General Information) >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to appropriate ENGINE article for the specification.
  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
Fig 1: Identifying Connecting Rod Large End Bore
G06064086Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals