Low-Charge Protection Switch
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Low-charge protection switch electrical connector (part of 14290) |
| 2 | 19E561 | Low-charge protection switch |
| 3 | 19D701 | Low-charge protection switch Schrader-type valve |
| 4 | 19E889 | O-ring seal |
The low-charge protection switch is installed on the evaporator outlet line to cycle the A/C compressor off in the event of a low refrigerant charge. The PCM monitors the low-charge protection switch in-series with the dual-function pressure switch. When the low-side pressure drops below acceptable levels, the low-charge protection switch contacts open. When the low-charge protection switch contacts are open, the PCM will disengage the A/C compressor clutch.
The low-charge protection switch is installed on a Schrader-type valve core fitting on the evaporator outlet line. It is not necessary to recover the refrigerant to remove the low-charge protection switch.