Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2008 >> Escape Base, 3.0 1, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Flywheel Inspection

Flywheel Inspection

    NOTE: The flywheel cannot be resurfaced, it must be replaced.
  1. Inspect the flywheel for:
    1. any cracks.
    2. worn ring gear teeth.
    3. chipped or cracked ring gear teeth.
    4. scratches, nicks and discoloration.
    2. Fig 1: Inspecting Flywheel For Damages
    GF0002365Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals