Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Expedition 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • Refer to ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to ENGINE article for the procedure.
    2. Fig 1: Measuring Connecting Rod Large End Bore
    G03946845Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals