Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Removal And Installation >> In-Vehicle Temperature Sensor >> Removal And Installation

Removal And Installation

  1. Remove the 2 lower steering column opening cover bolts.
  2. Detach the lower steering column opening cover.
  3. Disconnect the in-vehicle temperature sensor aspirator hose.
  4. Disconnect the in-vehicle temperature sensor electrical connector.
  5. Release the 2 in-vehicle temperature sensor clips and remove the in-vehicle temperature sensor.
    6. NOTE: The in-vehicle temperature sensor hose and venturi assembly can be accessed from below the driver side of the instrument panel.
  6. Remove the in-vehicle temperature sensor hose and venturi assembly.
  7. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals